Cornices
01 / 06
Ceiling and wall profiles, classical to modern.
150+ designsCustom lengths
— Liepāja studio · Est. 2004 · 🇪🇺 EU installation
Add sophisticated luxury
to your interior.
A Liepāja studio casting, restoring and installing decorative gypsum since 2004 — cornices, columns, rosettes and façade details for private homes, hotels and public spaces across Latvia and Europe.
30+ yrs
In the craft
600+
Profiles in the catalogue
Hand-cast
Every profile
Across Europe
Installation
— Our philosophy
Ornament is not decoration — it is architecture slowed down enough to be felt.
We treat gypsum the way a silversmith treats silver. Every cornice begins with a drawing, a mould pulled by hand, a cast finished under raking light to catch what the eye will later miss.
Our studio has cast for Liepāja apartments, hotels in Jūrmala, façades in Rīga and homes across Latvia. Same workshop, same hands, since 2004.
What leaves the studio is always the same: a piece that fits its building as if it had always been there. That is the only measure we keep.
— Why gypsum
A material with memory.
Six reasons the oldest architectural material still outperforms every synthetic substitute brought to market since.
01
Ecological
Fibreglass-reinforced gypsum — inert, breathable, safe for living spaces.
02
Fire resistant
Non-combustible by nature; a quiet safety margin in every profile.
03
Thermal & acoustic
Mass and damping built into each moulding — rooms feel calmer, warmer.
04
Clean installation
Strips up to four metres, seamless joins, one week of work for decades of presence.
05
Seamless joints
Joins finished by hand — you see the ornament, not the connection.
06
30+ years of craft
Three decades at the bench — two of them in this workshop. Knowledge that shows in the details.
— Services
Three practices, one workshop.
01
Manufacturing
Custom gypsum castings made to your drawings — or ours.
- Ceiling and wall cornices
- Columns and pilasters
- Ceiling rosettes, Ø 30–150 cm
- Interior and façade ornament
02
Restoration
We restore exterior façade decor and interior plasterwork — full re-cast or partial repair.
- Exterior façade elements
- Interior plaster details
- Re-casting of lost ornament
- Hand-finished joints
03
Installation
Our crew installs across Latvia and Europe — precisely, quickly, quietly.
- Halls, hotels, private homes
- Europe-wide service
- Consultation for self-installers
- Quality guarantee
— Catalogue
Six families, hundreds of profiles.
Columns and pilasters
02 / 06
Classical orders, full and engaged.
80+ designsAll heights
Rosettes
03 / 06
Ceiling centrepieces and medallions.
60+ designsØ 30–150 cm
Decorative
04 / 06
Ornament, brackets, cartouches.
200+ piecesVarious
Façade elements
05 / 06
Exterior details, weather-resistant.
100+ designsAll scales
Bespoke
06 / 06
Made to your drawings, styles, deadlines.
UnlimitedAny size
— Process
From drawing to dust on the floor.
01
Consultation
We come to the site, measure, photograph and talk through drawings, project requirements and material.
02
Pattern and mould
A master pattern is carved or turned, then silicone-moulded. Every profile begins as a drawing on paper.
03
Casting
Fibreglass-reinforced gypsum is poured by hand into the mould. Finish, trim, cure — no two batches blended.
04
Delivery and install
Our crew installs on-site in Latvia and across Europe, or the pieces ship ready for your contractors.
— Recent work
From façades to quiet apartments.
— What clients say
DeCorGips restored the cornices of our reception room with such precision you cannot see where the original ends and the recasting begins.
Four-metre strips, clean joints, delivered on time.
The workshop understands ornament the way few do — not as decoration but as architecture.
— Get in touch
Let's talk about your project.
- StudioKurzemes iela 2–3N, Liepāja, LV-3401
- Telephone
- Emaildecorgips@inbox.lv
- VisitsStudio visits by appointment